In industrial work, it is important to use protective gloves to avoid scratches and possible cuts. With an extensive assortment of gloves to choose according to the type of work that is developed, the protection of the hands is essential to avoid any damage to the user’s skin. We have gloves of all types, as well as aprons, sleeves, and gaiters. Have a look at the type of gloves used by tree workers.
Type of gloves used by tree workers:
The gloves are considered as the best garment to give protection to the hands on any product that is going to be handled. However, keep in mind that not all gloves are suitable for the same activities. Therefore, there are different types of gloves, manufactured with different components that support, to a greater or lesser extent, the characteristics of the environments, tasks, and products with which they can be used. Considering its importance and implementation, there are basically five types of gloves: latex, vinyl, nitrile, vitrile and neoprene gloves.
At type of gloves used by tree workers you can find a wide range of protective gloves and dispensers to cover all the needs of professional hygiene, with cases of 100 gloves of all these types (except neoprene that is sold in pairs) and in all sizes what you wish. From disposable polyethylene gloves to reusable satins, they cover the needs of the hotel, industry, shops, schools, supermarkets, hospitals, etc.
When should safety gloves be used at work?
Work safety gloves should be used if the risk assessment concludes it. In this way, it means that the worker is exposed to a potential risk or danger in terms of hands and/or arms. Individual protection through gloves is required when the risk cannot be eliminated by the organization’s own controls, therefore, once carried out during the evaluation test, only if there is still a risk, gloves must be used. In addition, it is the employer’s obligation to ensure that workers carry such protection. Look for type of gloves used by tree workers.
How to choose what type of glove do we need?
Gloves should also be selected according to the risk assessment. There is a large multitude of work gloves to protect a large number of risks. That important thing is to determine those specific gloves to protect what the risk assessment requires us according to the tasks corresponding to your job. Keep in mind that many gloves can be effective in a precise situation but not be valid in the workplace as a whole.
Thus, an appropriate choice should be made so that the activity can be carried out as easily as possible, maximizing the highest level of protection. We will find so many varieties that seem infinite if we realize that the same risk, the same danger or the same protection when performing a specific application, can be satisfied with two or more varieties of gloves. Choosing the type of gloves used by tree workers need is also thinking about whether it is really desirable to put on or take off the glove in a matter of thousandths of a second or we have all the time we need. Thus, it will be necessary to require a glove with a design that minimizes the time of placement and, in the same way, the time of removal of the glove. Only by minimizing this time, in some jobs, will we avoid exposing ourselves to danger or will we not substantially increase it to the point of not being able to use the glove.
Choosing the type of glove also happens in knowing exactly what part of the hand we want to protect. What part of the hand should exert greater pressure? What part of the glove will suffer the most wear? Need protection on the back and back of the glove? Do we need the same protection for both hands? Will we stay supported by the manipulation? Do we need a protective sleeve that overlaps with our work clothes? Confused, see type of gloves used by tree workers.
Types of safety gloves categories:
Individual protection equipment is divided into 3 categories, I, II, and III, depending on the risk or danger that they are subjected to. Thus, as the safety gloves are included within the PPE they are also classified in the 3 divisions:
Gloves Category I include those gloves of simple design, which protect against minor risks. It is recommended that the worker himself judge their effectiveness against minimum risks and whose effects when they are gradual and, therefore, can be detected in time and without danger.
Category II gloves include those gloves that protect against risks that are not fatal or that could cause serious or very serious injuries to the user. Therefore, it protects against the most common intermediate risks in the industry.
Category III it is a complex design, designed to protect the user from all those mortal dangers that can seriously or irreversibly damage health, without being able to discover its immediate effect in time.
Safety gloves for work
There are many different materials and characteristics. That’s why we’re going to look at some types of safety gloves and their advantages. The gloves that should be used in saws when we handle wood and there is a risk of splintering, for example, are gloves without fingers, which are approved (that no one would think of cutting them …). in that way, we fulfill the protection against both risks. Depending on the risks listed, we can obtain the different types of protective gloves that will help us to be protected against a specific risk or a combination of them.
Types and classes of protective gloves
In the market, there are a large number of types of protective gloves that are capable of protecting the worker against a multitude of risks.
POLYURETHANE (PU) GLOVES FOR WOODWORKS:
100% polyurethane coated glove
The polyurethane is another type of synthetic fiber that records high resistance to mechanical risks, despite being fine. Thanks to the flexibility of this material, the gloves guarantee an important maneuverability, ergonomics, and comfort. They ensure a smooth grip in dry or humid environments.
Polyurethane gloves ensure greater sensitivity to touch, so they are widely used in assembly and handling of electronic components. They are also used in the automotive, plastic, glass and metal industries and for assembly, maintenance, among other professional applications.